Section 1 — Introduction
11
Instrument Connections
The top panel of the instrument is equipped with the following
connectors:
Top panel
Label
number
Feature Description
1 Ethernet port Connects to a standard 8P8C (RJ45)
male plug terminator
2 USB host port Connects to an external USB memory
device for data import and export
MORE: See Export/Import Data via an
External USB Flash Drive.
3 USB socket Provides a data connection between
the instrument and an Ascent
software host computer
4 Charger power socket
(12 Volt 3 Amp input)
Enables you to power the instrument
and charge the its battery pack
5 BNC sensor input Channel 1
6 BNC sensor input Channel 2
7 LEMO four-pin
tachometer input
IMPORTANT! Ensure the protective rubber cover is securely
fastened over the instrument communication ports while you
collect data in the field. Failure to do this may void your warranty.
The IP65 rating only applies while the rubber cover is securely
fastened.
To Next Page
Loading...
