GE SCOUT140-Ex - Change Sensor Temporarily; Change Default Sensor; Delete Sensor; Notes

Section 10 — Create, Edit, and Delete Items
209
Change Sensor Temporarily
To temporarily switch to using a different sensor:
1. Open the Measurement Setup screen.
2. Select the type of measurement you wish to take.
3. Press > Press .
Change Default Sensor
To change the default sensor:
1. Press Options on the main menu.
2. Press Sensor Setup > Press Change Sensor beside your
chosen measuring channel.
3. Press Select as Default to select the sensor you wish to use for
the schedule entries sent from Ascent.
Delete Sensor
If required you can remove a sensor from your machine. To do this:
1. Press Options on the main menu.
2. Press Sensor Setup > Press Change Sensor beside your
chosen measuring channel.
3. Use the arrow keys on the left to select the required sensor.
4. Press Delete Sensor.
Notes
You can create, view, attach, edit, and remove notes.