Section 10 — Create, Edit, and Delete Items
203
Rename Machine Structure
If required, you can rename a machine structure.
CAUTION! Ascent identifies machines structures and sensors by
their names. If you rename an item on your instrument, Ascent will
treat this as a new item when you transfer the data.
NOTE: The default locations (horizontal, vertical etc) cannot be
renamed. If you want to rename a location from horizontal to
vertical, (for example), simply create a new vertical location on a
point and copy any required parameter sets from the horizontal
location, then delete the horizontal location.
1. Press or Record Review on the main menu.
2. Press repeatedly to display the machines.
3. Use the arrow keys on the left to select a machine.
4. Press repeatedly to display the points and other lower level
items.
5. Select the item you wish to rename > Press Edit Name.
6. Edit the name as required > Press .
NOTE: The screen will also display point and machine speed details
(e.g. speed type, default speed, RPM multiplier). This information is
read-only and cannot be edited.
To Next Page
Loading...
