Section 7 — Analyzing Measurements Onsite
147
View Orders
When orders are displayed, the frequency axis of a spectral chart is
labeled in order of running speed, rather than Hz or CPM. This enables
you to see how closely spectral peaks correspond to the running speed
of the machine.
You can also move a cursor to a peak of interest. The exact number of
orders at that frequency will display at the top of your screen.
To view an order:
1. Display a spectral chart.
2. Set the RPM.
3. Press > Press X Axis Orders.
4. Repeat the previous step to deactivate orders.
To Next Page
Loading...
