Section 8 — Send and Receive Information
161
Send Data from Instrument to Remote Comms
Server
To send data from your instrument to your Remote Comms server:
1. Press Remote Comms > Wait while your instrument connects
to the server.
2. Press Sync with Server or Send Folder.
NOTE: The option displayed depends on the settings you specified
for Remote Comms on your instrument.
3. Select the folder you wish to send the data to > Press .
4. Take EITHER of these actions:
• Press Delete if you wish to delete the folder you have
just uploaded.
• Press Continue if you wish to retain the folder you
have uploaded to the server.
Sending data from an instrument to a Remote Comms server
To Next Page
Loading...
