Section 1 — Introduction
16
Remove Battery Pack
To remove the battery pack from your instrument:
1. Use a 2 x Phillips head to loosen the screws that attach the battery
cover to the bottom panel of the instrument.
2. Set the battery cover aside and extract the battery.
WARNING! Do NOT detach the battery pack from the instrument
for more than 10 minutes. This will cause the instrument date/time
to be reset. Stored measurement data or recordings will NOT be
lost.
WARNING! Ensure power is NOT supplied to the instrument when
you remove the battery. Unplug any connected power adapters
before removing the battery.
WARNING! You should NOT re-insert a damaged battery in your
instrument. Dispose of damaged batteries responsibly and in
accordance with local regulations. Do NOT disassemble the
battery or use fire to dispose of it. Replacement batteries are
available from authorized distributors (part number BATT0206).
To Next Page
Loading...
