Section 9 — Working with Routes
174
6. Press Alarm Bands repeatedly to cycle through the spectral
band alarm alert options:
• Warn & LEDs will display a message on your screen and
illuminate the appropriate instrument LEDs if the spectrum
band alarm you have configured in Ascent is exceeded by the
measurement.
• LEDs only will only illuminate the instrument LEDs. If the
measurement exceeds the specific alarm levels, a message will
NOT display.
• Disabled will NOT indicate that a band alarm level has been
exceeded, if this occurs.
NOTE: If triggered, the onscreen alert will specify the alarm state
and band range that has been exceeded. The highest alarm state
will display if more than one alarm is triggered.
To Next Page
Loading...
