GE Vivid i User Manual

Measurement and Analysis
Vivid i User’s Manual 135
2378958-100 Rev. 02
2. AV Diam is a 2D measurement, make sure that 2D is
checked in the Measurement sheet.
3. Select folder Dimension in the Measurement menu.
A list of all available measurements for the selected folder
is displayed in the Measurement menu sheet.
4. Check the box in front of AV Diam.
The AV Diam measurement is displayed in the folder
Dimension in the Measurement menu.
5. For the AV VTI measurement, check Doppler in the
Measurement menu sheet and select the folder Aortic in
the Measurement menu.
6. Check the box in front of AV Trace.
The AV Trace measurement is displayed in the folder
Aortic in the Measurement menu.
Figure 6-7: Configuration of the Measurement menu
1. Select the scanning mode for the measurement to add to the Measurement menu.
2. Select the folder for the measurement to add.
3. Select the measurement to add.
To Purchase, Visit Avobus.com or call 1-800-674-3655

GE Vivid i Specifications

General

Type	Portable Ultrasound System
Transducer Ports	2 active ports
Doppler Modes	Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler
Imaging Modes	2D, M-Mode
Connectivity	DICOM, Ethernet, USB
Applications	Vascular, Abdominal
Weight	Approximately 5.5 kg (12.1 lbs)
Battery Life	Up to 1 hour (depending on usage)
Probes	Phased array, Linear array, Convex array