Presets and System setup
292 Vivid i User’s Manual
2378958-100 Rev. 02
The Probe/application configuration
parameters
Parameter Description
Image Store settings:
• Single frame (live store):
: Store cineloop.
: Store single frame image only.
• Number of heart cycles:
Select the number of heart cycles to
store (Single frame must be
unchecked).
Auto freeze:
• Freeze 2D image in Doppler: the last
2D or color flow image is displayed
when entering in Doppler mode.
• Auto freeze after: sets the time after
which the system enters in freeze when
not in use.
Templates and Packages:
Defines the default stress protocol
associated to the application.
Select the default Protocol to be
associated to the selected application
from the pop-up menu.
Auto invert on steer:
In Color flow, the color bar is inverted
when steering the color flow sector angle.
To Next Page
Loading...
