Presets and System setup
Vivid i User’s Manual 333
2378958-100 Rev. 02
3. Select the type of user/referring member in Member of
Group(s).
Editing an user configuration
1. Select the actual user in the User list.
2. Make the desired changes.
3. Press
CONFIG or any active scanning key to exit the
Configuration management package.
Deleting a user
1. Select the actual user in the User list.
2. Press Delete.
The user is removed from the User list.
Auto logon and auto logoff
Auto logon
1. Select the desired logon setup from the pull down menu:
• Disabled: no default user is selected when logging on.
• Last user: the last user is selected automatically when
logging on.
• A specific user: select one of the users to be the default
user when logging on.
Auto logoff
1. Set the time span (from 10 min) for the system to
automatically log off when not in use.
CAUTION
To be able to login on the system, the group Operator MUST be
selected.
To Purchase, Visit Avobus.com or call 1-800-674-3655
To Next Page
Loading...
