VLT
®
5000 Series
■ Installation of VLT 5001-5006 200-240V, VLT
5001-5011 380-500 V CompactIP 20 and IP 54
Cooling
All Compact units require a minimum space of 100
mm above and below the enclosure and must be in-
stalled on a plane, vertical surface (no spacers).
This applies to both IP 20 and IP 54 units.
Side-by-side
All Compact units can be installed side-by-side with-
out any space between them, since the units do not
require any cooling on the sides.
MG.51.A1.02 - VLT is a registered Danfoss trade mark
43
Installation
To Next Page