Getinge GE15 - Page 103

To Next Page

To Previous Page

19. Close Flashloader.

20. If a new application must be loaded, start CS-1000 and load

the wash program, see 7.14.2 Load in a new application into

PACS with CS1000.

7 REPAIRS AND ADJUSTMENT

TECHNICAL MANUAL GETINGE WD15 CLARO 103 (128)

<Doc_TEC><Doc_6001396902><Rev.I><Lang_en>

Main Page

Table of Contents3
Preface7
Safety Precautions8
Important9
Isolator Switch9
Signs and Labels10
Attention Symbols10
Product Liability10
Declaration of Conformity10
Disclaimer10
Manufacturer11
Warranty11
Presentation12
Areas of Use12
Control Panel13
Indicators13
Control Buttons14
Window14
Software Description and Settings17
Process Selection18
Control System18
Password19
Menu Tree21
Home Menu22
Process Selection22
Start Process22
Process Screen23
Main Menu23
Login/Logout24
About24
System Menu24
Alarm History42
Print43
A Parameters44
P Parameters45
DIP Switches49
Alarm Management50
Information Texts51
Error Indicators52
Alarms52
Acknowledgement of an Error Code53
Emergency Opening of the Machine54
Error Codes in the Machine55
Troubleshooting56
Preventive Maintenance60
Periodic Maintenance60
Service Table61
Consumables62
General (Item 1)62
Checking Electrical Cables and Connection Points 1.162
Checking the Cooling Fan 1.263
Checking the Panel 1.363
Checking the Machine Is Level 1.463
Checking the Quick Guide 1.563
Checking Error Codes and Number of Processes 1.663
The Chamber (Item 2)63
Clean the Inside of the Chamber 2.163
Check the Spray Arms 2.264
Replacing Spray Arm Bearings 2.364
Checking Temperature Sensors 2.464
Checking the Strainer in the Bottom of the Chamber 2.565
Checking Insert for Goods 2.665
Checking the Wash Cart Guide Rails 2.765
Checking the Salt Level in the Salt Filter (Option) 2.865
Door (Item 3)65
Checking Door and Door Springs 3.165
Checking the Door Seal and Chamber Seal 3.266
Checking the Door Lock and Switch for Proper Functioning 3.366
Checking the Door Wire 3.466
Connections (Item 4)66
Checking Water and Drain Connections 4.166
Checking the Filter for Incoming Water 4.267
Dosing System (Item 5)67
Checking Hoses 5.168
Replacing a Hose to a Hose Pump 5.268
Checking the Dosing Amount 5.371
Checking the Empty Container Alarm 5.471
Dryer (Item 6)72
Replacing a HEPA Filter 6.172
Checking Fan Function 6.272
Checking the CPU Card and the HEPA Filter 6.372
Lighting (Item 7)72
Checking Lighting 7.172
Test Run (Item 8) (at each Service)73
Function and Leakage Check 8.173
Checking the Panel 8.273
Temperature Check 8.374
Function Check75
Instructions, Cable, Switch75
Filters and Valves75
Operator Display75
Insert for Items75
Door75
Detergent Dosing76
Washing System76
Temperature Check76
Dryer76
Repairs and Adjustment77
Maintenance with Open Door78
Attachment Pin Door78
Maintenance from the Chamber79
Replacing an Element79
Replacing/Cleaning Strainers80
Replacing/Cleaning Spray Arms80
Replacing the Guides for the Upper Tray81
Maintenance from Front Side82
Replacing a HEPA Filter82
Replacing a Dosing Pump83
Replacing the Waste Pump83
Replace the Pressure Switch from the Sump and Pump Pressure83
Replacing Fuses84
Assembly of Front Panel84
Removing Cover Panels85
Maintenance from above with the Top Plate off86
Door Switch86
Spray Arm Tap at Top86
Maintenance from the Side with the Cover Plates Removed87
Lamps87
Regenerating Tank87
Maintenance from Back Side88
Drying Box88
Main Pipe89
Valves89
Electric Terminals89
Maintenance from Bottom89
Turning the Machine90
Circulation Pump and Fan91
Sump91
Salt Filter92
Spray Arm Bottom92
Connecting a PC92
Printer Martel MCP8810X (Option)93
Printer Lexmark C524/534 (Option)95
Netcom (Option)97
External Dosing (Option)99
Load Program to Flash Memory100
Loading System Programs101
Load in a New Application into PACS with CS1000104
Reloading the Backup from "Flash Prom" to PACS106
Cold Start107
Changing User Language108
Calibrating Temperature Sensors - with Resistance109
Temperature Sensors - with Ice Bath and Oil Bath111
Calibrating Detergent Dosing114
Sensor List116
Addresses119
Alphabetical Index121

Getinge GE15 - Page 103

Table of Contents

Other manuals for Getinge GE15

Related product manuals