5.7.2.1 Hose selection
5.7.2.1.1 Hose materials from factory
The machines are supplied with the following hose material for the
different pumps:
Dosage No. Transport hoses Pump hose
Dosing 1 503645300, Tygon 502992000,
Norprene
Dosing 2 503645300, Tygon 502992001,
Silicone
Dosing 3 503645300, Tygon 502992000,
Norprene
Dosing 4 503645300, Tygon 502992000,
Norprene
The hoses in the hose pumps are exposed both to chemical wear
and mechanical wear. It is therefore important that the correct hose
material is selected with regard to the chosen detergent to achieve
safe operation and satisfactory service life. The hoses in the hose
pumps are consumable parts with an anticipated service life of 1
year. Replace the hoses as recommended in the tables below,
depending on the detergents to be used.
5.7.2.1.2 Available hose materials from Getinge sales companies
Note!
Calibration must always be done after a pump hose
replacement. See "Technical Manual."
The following types of hoses are available from Getinge sales
companies:
Article number Pump hose Design
502992000 Norprene Black with white
text
502992001 Silicone Transparent, matt
502992003 Fluran Black
502992004 Tygon Transparent,
yellow
5 PREVENTIVE MAINTENANCE
TECHNICAL MANUAL GETINGE WD15 CLARO 69 (128)
<Doc_TEC><Doc_6001396902><Rev.I><Lang_en>
To Next Page
Loading...
Need help?
General
