Getinge Maquet FLOW-i 4.2 User Manual

5.6 Waveform area
312
01-01 13 00
The waveform area is customizable, allowing
for different arrangements of displayed
information.
In addition to the real-time waveforms, any
one of the following can be shown
simultaneously by selecting the corresponding
tab located to the right in the waveform area:
1. Waveforms
2. Loops
3. Short trends
4. Volume reflector indicator
5. Gas pressure
There are two methods of activating and
displaying any one of these tabs:
• Startup Configuration. Settings affect the
number and type of tabs shown at the start
of every patient case.
• Screen layout window. These settings affect
the current patient case. Any changes made
during a patient case revert to Startup
configuration when the patient case is
ended.
Startup configuration settings are described
in Chapter 9, page 174.
The Screen layout, accessed via the Screen
layout membrane button, is described in
Chapter 9, page 163.
FLOW-i 4.2, User's Manual
107
| System functionality |
5 |

Getinge Maquet FLOW-i 4.2 Specifications

General

Brand	Getinge
Model	Maquet FLOW-i 4.2
Category	Medical Equipment
Language	English