Firmware Version 1.0.2.21 UCM6100 Series IP PBX User Manual Page 82 of 159
Note:
If "Public Mode" is enabled, the password is not requ
conference bridge thus this field is invalid.
Enable Caller Menu
If
enabled, conference participant could press the * key to access the
conference bridge menu. The default setting is "No".
Record Conference
If enabled, the calls in this conference bridge
automatically in a .wav format file. All the recording files will be displayed
and can be downloaded in the conference web page. The default setting
is "No".
Quiet Mode
If enabled, if there are users joining or leaving the conference, voice
prompt or notification tone won't be played. The default setting is "No".
Note:
"Quiet Mode" and "Announce Callers" cannot be enabled at the same
time.
Wait For Admin
If enabled, the participants will not hear each other until the conference
administrator joins the conference. The default setting is "No".
Note:
If "Quiet Mode" is enabled, the voice prompt for "Wait For Admin" will not
be announced.
Enable User Invite
If enabled, users could press 0 to invite other users
(with the users'
permission) or press 1 to invite other users (without the user's
permission) to join the conference. The default setting is "No".
Note:
Conference administrator can always in
vite other users without enabling
this option.
Announce Callers
If enabled, the caller will be announced
to all conference participants
when there the caller joins the conference. The default setting is "No".
Note:
"Quiet Mode" and "Announce Callers" can
not be enabled at the same
If enabled, no authentication will be required when joining the
conference call. The default setting is "Yes".
Play Hold Music For First
Caller
If enabled, the UCM6100 will play Hold music to the first participant in
the conference until another user joins in. The default setting is "No".
http://arttel.ru
http://arttel.ru/shop/ip-atc/ip-ats-grandstream-ucm6102
To Next Page
Loading...
Need help?
General
