GRAPHTEC CE7000 Series - Display Length Unit Settings (Length Unit) (Simple Mode)

2-70
2.12.5 Display Length Unit Settings (Length Unit) (Simple mode)
You can choose to have length units displayed in either meters or inches.
This can be changed in Normal mode.
Operation
1
In default screen, press [PAUSE/MENU] key.
MENU screen is displayed.
2
Press [3] key (ADV.).
ADVANCE setting screen is displayed.
3
Press [2] key (LENGTH UNIT).
LENGTH UNIT setting screen is displayed.
4
Press [1] key (METRIC) or [2] key (INCH).
Supplement
It will return to ADVANCE screen without
changing the settings when you press the [ESC]
key (CANCEL).
5
Conrm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to ADVANCE setting screen.
6
Press [PAUSE/MENU] key.
It will return to default screen.