GRAPHTEC CE7000 Series - 9.2 Clearing Buffer Memory

9-4
9.2
Clearing the Buffer Memory
This function allows you to clear all the output data in the plotter's buffer memory.
CAUTION
Do not execute the BUFFER CLEAR function until the operation of the plotter is stopped.
Operation
Supplement
Perform the settings in Normal mode.
1
Press the [PAUSE/MENU] key.
MENU screen is displayed.
2
Press the POSITION ( ) key (I/F).
INTERFACE screen (1/3) is displayed.
3
Press the [1] key (BUFFER CLEAR).
BUFFER CLEAR screen is displayed.
Supplement
It will return to INTERFACE screen (1/3) without
changing the settings when you press the [ESC]
key (CANCEL).
4
Press the [1] key (YES, CLEAR).
Buffer will be cleared and it will return to default screen.