GRAPHTEC CE7000 Series - Model ID Response (HP-GL)

11-7
Related to HP-GL command
This section is useful only when using the HP-GL command
Model ID response (HP-GL MODEL EMULATED)
This function set the operation upon receipt of the "OI" command requesting for the model ID. The reply will be
7550 when set to 7550, and 7586 when set to 7586.
Operation
Supplement
Perform the settings in Normal mode.
1
Press the [PAUSE/MENU] key in the default screen.
MENU screen is displayed.
2
Press the POSITION ( ) key (I/F).
INTERFACE screen (1/3) is displayed.
3
Press the [4] key (HP-GL MODEL EMULATED).
HP-GL MODEL EMULATED screen is displayed.
4
Press the [1] key (7550) or the [2] key (7586).
5
Conrm the setting and press the [ENTER] key (SET).
Setting will be conrmed and it will return to INTERFACE screen (1/3).
6
Press the [PAUSE/MENU] key.
It will return to default screen.