GRAPHTEC CE7000 Series - Reading the Screen (LCD)

2-32
SLOW ......................... When pressing the POSITION key at the same time, the tool carriage moves slowly.
When the "SLOW" icon is displayed on the screen, it works as a menu key.
When the [SLOW] key is pressed in the READY screen, the current cutting/plotting area
and the position of tool carriage are displayed.
1, 2, 3, 4 ..................... Select the menu number displayed in the screen.
POSITION (
, , ,
) key
............................ Adjusts various settings, selects numerical value changes, moves the cursor, and
changes the positions in the MENU screen.
Reading the screen (LCD)
Information reecting the status will be displayed in the screen of the control panel.
Name of the button and corresponding function are displayed on the screen when a function is allocated to the
button on the control panel. Button name will be displayed in reverse when the button is enabled.
READY screen
(READY)
MENU screen
(PAUSE/MENU)
CONDITION setting screen
(COND/TEST)
Media set lever raised Media set lever lowered
Set condition of media (READY status:
It will display "READY" when the media is loaded)
Display of setting condition
Corresponding button name of control panel
(Valid button is displayed in reverse)
User number
Tool number currently used
Tool conditions currently used
Command : GP-GL : GP-GL Command
HP-GL : HP-GL Command
(No Display) : Command Auto
Step size : 0.1 : 0.1mm
0.05 : 0.05mm
0.025 : 0.025mm
0.01 : 0.01mm
Rotate/Mrror : R90 : Rotation (Rotate 90°)
: Mir : Mirror
R90 Mir : Mirror and Rotate
Priority : MANUL : Manual priority
PROGRA : Pogram priority
Sort : Sort ON : Display when sort is on
Prefeed : Pre FEED :
Display when automatic media feed is onMedia