GRAPHTEC CE7000 Series - Display Length Unit Setting

10-3
Display Length Unit Setting (LENGTH UNIT)
The coordinate values that appear on the display and the other parameters for various settings can be changed
to either meter or inch display.
Operation
1
Press the [PAUSE/MENU] key in the default screen.
MENU screen is displayed.
Menu screen
(Normal mode)
Menu screen
(Simple mode)
2
Press the POSITION ( ) key (ADV.) in Normal mode or press
the [3] key (ADV.) in Simple mode.
ADVANCE screen is displayed.
ADVANCE screen
(Normal mode)
ADVANCE screen
(Simple mode)
3
Press the [3] key (LENGTH UNIT) in Normal mode or press
the [2] key (LENGTH UNIT) in Simple mode.
LENGTH UNIT screen is displayed.
4
Press the [1] key (METRIC) or the [2] key (INCH).
Supplement
It will return to ADVANCE screen without
changing the settings when you press the [ESC]
key (CANCEL).
5
Conrm the setting and press the [ENTER] key (SET).
Setting will be conrmed and it will return to ADVANCE screen.
6
Press the [PAUSE/MENU] key.
It will return to default screen.