GRAPHTEC CE7000 Series - Enabling;Disabling the Beep Setting (BEEP for KEY OPERATION)

10-8
Enabling/Disabling the beep setting (BEEP FOR KEY OPERATION)
This function selects whether to enable or disable the beep that is emitted whenever a control panel key is
pressed.
Operation
Supplement
Perform the settings in Normal mode.
1
Press the [PAUSE/MENU] key in the default screen.
MENU screen is displayed.
2
Press the POSITION ( ) key (ADV.).
ADVANCE screen (1/4) is displayed.
3
Press the [4] key (BEEP FOR KEY OPE.).
BEEP FOR KEY OPE. setting screen is displayed.
4
Press the [1] key (ON) or the [2] key (OFF).
Supplement
It will return to ADVANCE screen (1/4) without
changing the settings when you press the [ESC]
key (CANCEL).
5
Conrm the setting and press the [ENTER] key (SET).
Setting will be confirmed and it will return to ADVANCE screen (1/4).
6
Press the [PAUSE/MENU] key.
It will return to default screen.