2-34
Icon of the corresponding operation button is displayed in the screen to change the setting values.
Example of screen to change the settings value
Increase or decrease the setting
value using POSITION (
)
keys.
Select the change unit by
[SLOW] key.
Select the setting by number
keys (1, 2, 3, 4).
Contents of Operation from MENU Screen
In [Simple mode] on the ADVANCE (ADV.) menu, switch between Simple mode and Normal mode.
In Normal mode, you will be able to change more detailed settings.
Simple mode and Normal mode are independent from one another. The settings of the mode you're currently in
will take precedence.
Simple mode
Menu screen
(Simple mode)
Contents of the operation and settings that is displayed in MENU screen with [PAUSE/MENU] key are as
following:
[1] (MEDIA) : Set the setting of the condition for the media.
[2] (I/F) : Set the settings of the condition for the interfacing with the computer.
[3] (ADV.) : Set the conditions for the basic operation of the cutting plotter, such as display language
and unit of length.
[PAUSE/MENU] : MENU screen will be closed and return to default screen.
[SLOW] : Displays the position key screen. When media is set, the tool point can be moved
See the "Menu Tree" in the Appendix A.4 for list of the descriptions about each settings.
To Next Page
Loading...
