2-3
Structure of cutter plunger
PHP33-CB09N-HS/
PHP33-CB15N-HS
Cutter blade
φ0.9 mm / φ1.5 mm diameter
Plunger
Plunger-cap
(blue) / (red)
Blade-length adjustment knob
Hole
CAUTION
<PHP33-CB09N-HS/PHP33-CB15N-HS>
•
Please fully insert the cutter blade straight into the plunger cap.
If the cutter blade cannot be inserted straight, please insert the cutter blade after pressing the insertion port of the cutter blade
several times.
Insertion port of the cutter blade
If not installed correctly, it may result in damage to the cutter blade or the plotter itself.
To Next Page
Loading...
