GRAPHTEC CE7000 Series - Normal Mode

2-41
Normal mode
Operation: Operation with the [COND/TEST] key
1
Press the [COND/TEST] key in the READY status.
CONDITION setting screen (1/3) is displayed.
2
Press the [1] key (Condition No.).
CONDITION No. selection screen is displayed.
3
Press the POSITION ( ) keys and select the setting
(CONDITION No.).
Supplement
It will return to CONDITION setting screen
without changing the settings when you press
the [ESC] key before pressing the [ENTER].
4
Conrm the setting and press the [ENTER] key.
Setting will be conrmed and it will return to CONDITION setting screen
(1/3)
5
Press the [COND/TEST] key.
It will return to default screen.
Operation: Operation with the [ENTER] key
1
Press the [ENTER] key in the READY status.
CONDITION No. selection screen is displayed.
2
Press the [1] to [4] keys, or the POSITION ( ) keys,
while simultaneously pressing the [ENTER] key.
3
Conrm the setting and release the [ENTER] key.
It will return to the default screen.