GRAPHTEC CE7000 Series - Page 127

4-9
Supplement
Values that can be set are 1/8, 1/4, 1/2, 1, 2, 3, 4,
5, 6, 7, and 8 (multiplications).
4
Press the POSITION ( ) kesy and increase or decrease the
setting value.
Supplement
It will return to AREA PARAMETERS screen (1/2)
without changing the settings when you press
the [ESC] key (CANCEL).
5
Conrm the setting and press the [ENTER] key (SET).
Setting will be conrmed and it will return to AREA PARAMETERS
screen (1/2).
6
Press the [PAUSE/MENU] key.
It will return to default screen.