GRAPHTEC CE7000 Series - Page 143

5-9
3
Press the [1] key (SCAN MODE).
SCAN MODE screen is displayed.
4
Press the [1] key (SCAN MODE).
SCAN MODE screen is displayed.
Supplement
It will return to ARMS SETTING screen without
changing the settings when you press the [ESC]
key (PREVIOUS).
5
Press the POSITION ( ) keys and select the mode.
Press the [ESC] key (PREVIOUS).
Supplement
The adjustment range of SCAN Mode 1 and 2 is
-50 to 100, and the adjustment range of SCAN
Mode 3 is -50 to 50.
6
Press the [2] key (ADJUST LEVEL).
ADJUST LEVEL screen is displayed.
Supplement
Press the [SLOW] key to select the setting
digits.
7
Press the POSITION ( ) keys and increase or decrease the
setting value.
Press the [ESC] key (PREVIOUS).
Supplement
It will return to ARMS SETTING screen (1/3)
without changing the settings when you press
the [ESC] key (CANCEL).
8
Conrm the setting and press the [ENTER] key (SET).
Setting will be conrmed and it will return to ARMS SETTING screen
(1/3).
9
Press the [PAUSE/MENU] key.
It will return to default screen.