GRAPHTEC CE7000 Series - Page 165

6-5
5
Press the POSITION ( ) key.
ARMS SETTING screen (3/3) is displayed.
6
Press the [2] key (MARK SCAN MODE).
MARK SCAN MODE screen is displayed.
7
Press the [1] key (MARK SCAN MODE).
MARK SCAN MODE setting screen is displayed.
Supplement
It will return to ARMS SETTING screen without
changing the setting when you press the [ESC]
key (PREVIOUS).
8
Press the [2] key (AXIS ALIGNMENT).
Axis Adjustment Mode will be activated and it will return to the MARK
SCAN MODE setting screen.
9
Press the [2] key (NUMBER OF POINTS).
NUMBER OF POINTS screen is displayed.
Supplement
It will return to MARK SCAN MODE screen
without changing the setting when you press the
[ESC] key (PREVIOUS).
10
Press the [1] key (2POINTS), the [2] key (3POINTS), or the [3]
key (4POINTS).
The number of registration marks will be selected and it will return to
MARK SCAN MODE screen.
11
Conrm the setting and press the [ENTER] key (SET).
Setting will be conrmed and it will return to ARMS SETTING screen
(3/3).