8-10
Supplement
•
You can set to AUTO, 10, 20, 30, 40, 50 or 60
cm/s.
•
It will be same speed as tool is lowered when
AUTO is selected.
5
Press the POSITION ( ) keys and increase or decrease
the setting value.
Supplement
It will return to TOOLS SETTING screen (3/4)
without changing the settings when you press
the [ESC] key (CANCEL).
6
Conrm the setting and press the [ENTER] key (SET).
Setting will be conrmed and it will return to TOOLS SETTING screen
(3/4).
7
Press the [PAUSE/MENU] key.
It will return to default screen.
To Next Page
Loading...
