GRAPHTEC CE7000 Series - Page 212

9-6
3
Press the POSITION ( ) key.
INTERFACE screen (2/3) is displayed.
4
Press the [3] key (LAN).
NETWORK (LAN) setting screen is displayed.
5
Press the [1] key (DHCP).
DHCP screen is displayed.
6
Press the [1] key (ON) or the [2] key (OFF).
Supplement
It will return to INTERFACE screen (2/3) without
changing the settings when you press the [ESC]
key (CANCEL).
7
Conrm the setting and press the [ENTER] key (SET).
Setting will be conrmed and it will return to INTERFACE screen (2/3).
8
Press the [PAUSE/MENU] key.
It will return to default screen.