GRAPHTEC CE7000 Series - Page 219

9-13
10
Press the [3] key (PARITY).
PARITY screen is displayed.
Supplement
•
Match it to the software you are using.
•
It will return to RS-232C setting screen (2/3)
without changing the settings when you press
the [ESC] key (PREVIOUS).
11
Press the [1] key (NONE), [2] key (EVEN) or the [3] key (ODD).
The parity will be selected and it will return to RS-232C setting screen.
12
Press the [4] key (HANDSHAKE).
HANDSHAKE screen is displayed.
Supplement
•
Match it to the software you are using.
•
It will return to RS-232C setting screen (2/3)
without changing the settings when you press
the [ESC] key (PREVIOUS).
•
Enq/Ack setting is available only for HP-GL.
Even if you set to Enq/Ack during GP-GL, It is
set to HARD WIRE..
13
Press the [1] key (HARDWIRE ), the [2] key (Xon/off) or the [3]
key (Enq/Ack).
The handshake will be selected and it will return to RS-232C setting
screen.
14
Conrm the setting and press the [ENTER] key (SET).
Setting will be conrmed and it will return to RS-232C setting screen.
15
Press the [PAUSE/MENU] key.
It will return to default screen.