GRAPHTEC CE7000 Series - Page 226

10-6
4
Press the [2] key (PUSH ROLLER SENSOR).
PUSH ROLLER SENSOR screen is displayed.
Supplement
If "DISABLED" is selected, push roller detection
is not performed.
It will not generate error even if the inner push
rollers are not on the grit rollers when the
"INSIDE DISABLED" is selected.
5
Press the [1] key (ENABLED), the [2] key (INSIDE
DISABLED), or the [3] key (DISABLED).
Supplement
•
When "DISABLE" has been set, the home
sensor position is not detected, so depending
on the data, a position error could occur.
•
It will return to ADVANCE screen (4/4) without
changing the settings when you press the
[ESC] key (CANCEL).
6
Conrm the setting and press the [ENTER] key (SET).
Setting will be conrmed and it will return to ADVANCE screen (4/4).
7
Press the [PAUSE/MENU] key.
It will return to default screen.