GRAPHTEC CE7000 Series - Page 299

14-9
12
Press [3] key (ALARM DISTANCE).
ALARM DISTANCE screen is displayed.
Supplement
You can set the range between 1 and 8.
13
Press the POSITION ( ) key to select the tool condition
number (CONDITION No.).
Supplement
You can set the range between 500 m and 5000
m (100m-step).
14
Press the POSITION ( ) key and increase or decrease the
setting value.
15
Conrm the setting and press the [ENTER] key (SET).
Setting will be conrmed and it will return to BLADE WEAR ALARM
SETUP screen
16
Press the [4] key (CLEAR B. WEAR VALUE GROUP).
CLEAR B. WEAR VALUE GROUP screen is displayed.
17
Press the POSITION ( ) key to select the GROUP No.
Supplement
It will return to CLEAR B. WEAR VALUE
GROUP screen without clearing it when you
press the [ESC] key (CANCEL).
18
Conrm the setting and press the [ENTER] key (SET).
CLEAR ? screen is displayed.