15-25
6
Press the [1] key (DIAGNOSTICS).
DIAGNOSTICS start screen is displayed.
7
Press the [1] key (START).
Messages for testing are displayed on the screen.
8
Operate the keys and the sensors following the instructions
on the screen.
"OK" will be displayed if the operation is detected correctly, and next test
will start.
It will return to TEST screen once all the test items are completed.
Test items are as following. (It may be changed.)
1 Set lever sensor 2 Home sensor 3 Push roller sensor 4 -X media sensor
5 +X media sensor 6 X motor signal 7 Y motor signal 8 Tool height signal
9 [1] key 10 [2] key 11 [3] key 12 [4] key
13 [BARCODE] key 14 [SLOW] key 15 POSITION [ ] key 16 POSITION [ ] key
17 POSITION [ ] key 18 POSITION [ ] key 19 [PAUSE/MENU] key 20 [COND/TEST] key
21 [ORIGIN] key 22 [COPY] key 23 [ESC] key 24 [ENTER] key
To Next Page
Loading...
