GRAPHTEC CE7000 Series - A.1 Main Specifications

A-2
A .1
Main Specications
CE7000-40 CE7000-60 CE7000-130 CE7000-160
CPU 32bit CPU
Conguration Grit-rolling plotter
Drive Digital servo
Max. Cut Area 375 mm × 50 m 603 mm × 50 m 1270 mm × 50 m 1524 mm × 50 m
Guaranteed precision
cutting area
*1
355 mm × 2 m 583 mm × 5 m
*2
1250 mm × 5 m
*2
1504 mm × 5 m
*2
Mountable media width
*3
Min: 50 mm
Max: 484 mm
Min: 50 mm
Max: 712 mm
Min: 50 mm
Max: 1372 mm
Min: 50 mm
Max: 1626 mm
Available roll media
diameter
Max. diameter: 180 mm, Min. diameter: 76 mm
The number of push rollers 2 2 4 4
Max. cutting speed 60 cm/s (All directions) 90 cm/s (45°direction) 100 cm/s (45°direction)
Speciable speeds
(cm/s)
1 to 10, 15, 20, 25, 30,
35, 40, 45, 50, 55, 60,
1 to 10, 15, 20, 25, 30,
35, 40, 45, 50, 55, 60,
64
1 to 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65,
70, 71
Max. cutting force 4.41N (450gf)
Min. character size 5 mm (0.197 in.) alphanumeric Helvetica med. Font
*1
Mechanical resolution 0.005mm
Programmable resolution GP-GL : 0.1/0.05/0.025/0.01 mm
HP-GL
*4
: 0.025 mm
Repeatable accuracy
*1
0.1 mm/in unit of 2 m (Designated Film and Cut Conditions)
Number of cutters/pens 1 pc.
Usable pen type Water-based ber-tip and oil-based ballpoint
Compatible media Mono-vinyl chloride media, uorescent media, and reective media up to 0.25 mm thick (Excluding high-
intensity reective lm)
Interface USB2.0 (Full Speed) , Ethernet 10BASE-T/100BASE-TX, RS-232C
*6
Buffer memory 2 MB
Resident command sets GP-GL/HP-GL
*4
(Control panel switching, Auto switching)
LCD display Graphic type (240 × 128 dot)
Power supply AC100-120V, AC200V-240V 50/60Hz
Power consumption 100 VA or less
Operating environment 10 to 35℃, 35 to 75 % R.H. (non-condensing)
Guaranteed accuracy
environment
16 to 32℃, 35 to 70 % R.H. (non-condensing)
External dimensions
(Approx.)
(W × D × H)
772 mm × 460 mm ×
313 mm
1005 mm × 582 mm ×
1092 mm
*5
1704 mm × 811 mm ×
1215 mm
*5
1916 mm × 811 mm ×
1215 mm
*5
Weight ( Approx.) 13 kg
*5
22 kg
*5
51 kg
*5
55 kg
*5
*1: Varies depending on the type of Graphtec-authorized lm and the cutting conditions.
*2: When using basket.
*3: Describes the usable paper width. The accuracy of minimum media width is the width in parentheses ( ).
*4: HP-GL is a registered trademark of the US Hewlett Packard Company.
*5: Roll-medium tray or stand is included.
*6: RS-232C interface is optional depending on region. For details, please contact the distributor where you purchased.