GRAPHTEC CE7000 Series - Page 77

2-45
Supplement
•
Press the [ENTER] key (SET) to conrm the
settings and return to the READY screen.
•
Press the [4] key (RETURN) to return to the
READY screen without changing any settings.
•
The +0 value allows you to use the standard
force setting. If adjustment is necessary, you
can enter the ± adjusted value.
6
Press the POSITION ( ) key and increase or decrease the
adjustment value from the current number.
The force setting can be modied with the ± adjusted value.
When conrming the setting, press the [ENTER] key (SET).
Setting will be set, and it will return to default screen.