GRAPHTEC CELITE-50 - 5.9 Setting the Operation Panel; Language Selection; Selection of Unit for Lengths; Setting the Beep for Key Operation

5-26
Chapter 5 Detailed Settings
5.9 Setting the Operation Panel
Perform advanced settings for the operation panel.
Once you are done with the setting, touch the
(Exit) to return to the "HOME" screen.
Language Selection
Set the language that will be displayed in the operation panel.
1. From the "MENU" screen, open the
"ADVANCE 1/3" screen.
2. Touch the input box for "LANGUAGE
SELECTION".
3. Select the language to use and conrm
the selection with the
(Conrm).
Selection of Unit for Lengths
Set the unit for lengths that will be displayed in the operation panel.
1. From the "MENU" screen, open the "ADVANCE 1/3" screen.
2. Under "UNIT OF LENGTH", select "METRIC" or "INCH".
Setting the Beep for Key Operation
Set whether to sound a buzzer each time the keys on the operation panel are touched.
1. From the "MENU" screen, open the
"ADVANCE 1/3" screen and proceed to the
"ADVANCE 2/3" screen.
2. Select "ON" or "OFF" for "BEEP FOR KEY
OPE.".