GRAPHTEC CELITE-50 - A.5 List of Initial Values

A-9
Appendix
A.5 List of Initial Values
HOME Screen
Menu Item Setting Item Initial Value
LOAD MEDIA (No setting items) –
COPY MEDIA CHANGE MODE OFF
NUMBER OF COPIES 1
SPACING FOR COPIES 1mm
CUT TEST (No setting items) –
MOVE TO ORIGIN (No setting items) –
USB (No setting items) –
MOVE POSITION (No setting items) –
MENU Screen
Menu Item Setting Item Initial Value
TOOL OFFSET FORCE 10
TOOL UP SPEED AUTO
CONDITION PRIORITY PROGRAM
INITIAL BLADE 2 mm BELOW
ARMS ARMS MODE MODE 1
ADJUST LEVEL MODE 1 (+0)
CHECK MARK SCAN –
SENSOR OFFSET ADJ. X=0, Y=0
AUTO MARK SCAN ON
AREA MARGIN NORMAL
MEDIA AXIS ADJUST OFF
[MEDIA AXIS ADJUST] OFFSET X 0.0 mm
[MEDIA AXIS ADJUST] OFFSET Y 0.0 mm
[MEDIA AXIS ADJUST] DISTANCE ADJUST X 0.00%
[MEDIA AXIS ADJUST] DISTANCE ADJUST Y 0.00%
MEDIA PRE FEED 30 cm
AUTO PRE FEED OFF
FEED LENGTH 30 cm
PAGE LENGTH 50 cm
INITIAL FEED OFF
WIDTH DETECTION ON
INTERFACE COMMAND AUTO
HP-GL ORIGIN POINT LOWER LEFT
HP-GL MODEL EMULATED 7586
GP-GL STEP SIZE 0.100 mm
ADVANCE LANGUAGE SELECTION English / Japanese / German / French / Italian
/ Spanish / Portuguese / Russian / Chinese
/ Korean (selected when the power is turned
ON for the rst time)
UNIT OF LENGTH METRIC/INCH (selected when the power is
turned ON for the rst time)
BEEP FOR KEY OPE. ON
FIRMWARE VERSION –