GRAPHTEC CELITE-50 - 4.3 Plotting with the Drawing Pen; Setting the Drawing Pen in the Pen Adapter

4-14
Chapter 4 Convenient Functions
4.3 Plotting with the Drawing Pen
A commercially available drawing pen can be used for plotting by using the optional pen adapter.
Setting the Drawing Pen in the Pen Adapter
Three types of screws are included with the main body of the pen adapter. Use the
screw appropriate for the thickness of the drawing pen being used.
S (light gray): φ8 – 9mm
M (dark gray): φ9 – 10.2mm
L (black): φ10.2 – 11.3mm
1. Insert the drawing pen into the pen adapter from its rear side.
Pen Adapter Fixing Screw Drawing Pen
2. Adjust the pen so that the pen tip is protruding from the pen adapter by approximately 3 mm and turn the
xing screw clockwise to x the pen in place.
Pen Adapter Fixing Screw
Approx. 3 mm
Drawing Pen