GRAPHTEC CELITE-50 - 1.9 Settings when Turning the Power ON for the First Time

1-11
Chapter 1 Notes Before Use
1.9 Settings when Turning the Power ON for the First Time
When the device is started up for the rst time, it will be necessary to set the language and the unit for lengths.
Language Selection
When the power of this device is turned ON for the rst time, the startup screen will be
followed by a language selection screens.
Select the language used, and then touch the
(Conrm).
Selection of Unit for Length
Once the language has been set, the screen for selecting the unit for length will appear.
Select the unit used, and then touch the
(Conrm).
Once the unit for lengths has been set, the HOME screen will be displayed.