GRAPHTEC CELITE-50 - 1.3 Operation Panel; Types of Screens and Operations

1-4
Chapter 1 Notes Before Use
1.3 Operation Panel
Types of Screens and Operations
HOME Screen and Functions of Buttons
"MENU" button:
Used to transition to the "MENU" screen.
"CONDITION NO. Selection" buttons:
Used to select the CONDITION NO.
"CONDITION" button:
Used to transition to the CONDITION (cutting condition)
setting screen.
"LOAD MEDIA" button:
Used to transition to the Load Media screen.
The following screen is displayed when media is set.
"UNLOAD MEDIA" button:
Used to Unload Media that has been set.
"COPY" button:
Used to transition to the copy mode.
"CUT TEST" button:
Used to transition to the cut test screen.
"HOME" button:
Used to move the tool carriage to the home point.
"USB" button:
Used to transition to the menu for cutting from a USB memory.
Position key:
Used to transition to the position key screen.
Other Buttons
"Page" button:
Used to transition to the next page on the same tier level.
"Exit" button:
Used to exit the current screen. When touched before the
(Conrm) in a screen
where the
(Conrm) is displayed, the screen is exited without setting the item.
"Conrm" button:
Used to conrm settings.
"Execute" button:
Used to execute settings.
"Origin" button:
Used to congure the plot origin.
"Cutting Area" button:
Used to display th cutting area of the media that has been loaded.
"OK" button:
Used to conrm the position of the tool moved with the position keys.
"Stop" button:
Stops the cutting operation.
Menu Selection Screen
This screen is used to select setting
items. Please touch the button to set.
Different Button Colors
Light blue indicates the selected setting.
Please touch the button to set .
Different Display Boxes
White boxes can be touched to
transition to the input screen.
Light blue boxes display the
current setting value.