GRAPHTEC CELITE-50 - 5.1 Individually Registering Settings for Cutting Conditions

5-2
Chapter 5 Detailed Settings
5.1 Individually Registering Settings for Cutting Conditions
With settings for cutting conditions, eight types of cutting conditions from CONDITION NO. 1 through 8 can be
set and registered.
Set and register conditions according to the type of tool and media to be cut.
TOOL: Select the type of tool to be used.
SPEED: Set the cutting speed.
FORCE: Set the cutting force to be used.
ACCELERATION: Set the acceleration.
TANGENTIAL MODE: Used when cutting thick media.
OVERCUT START: Used to prevent uncut corners.
OVERCUT END: Used to prevent uncut corners.
DISTANCE ADJUST: Corrects the displacement by the length of the cutting line that occurs depending on the
type and thickness of the media.
Refer to the sections that follow for details on how to set each item.
1. On the "HOME" screen, touch the (CONDITION) to open the
CONDITION NO. (Cutting condition) setting screen.
2. As the setting items and details will be displayed, touch the " "
and " " to select the CONDITION NO. to set.
Set each item and touch the
(Exit) to return to the "HOME"
screen.