GRAPHTEC CELITE-50 - 2.5 Confirming the CONDITION NO. (Cutting Condition)

2-10
Chapter 2 Basic Operations
2.5 Conrming the CONDITION NO. (Cutting Condition)
Select a CONDITION NO. to which a cutting condition for the tool is registered and conrm the setting details.
That which is displayed in the currently selected CONDITION NO. and cutting condition.
Select the CONDITION NO. to use with the "
" and " " on the "HOME" screen and
conrm the setting details.
For more details on setting the CONDITION NO. and cutting conditions, refer to "5.1
Individually Registering Settings for Cutting Conditions".