GRAPHTEC CELITE-50 - A.1 Standard Specifications

A-2
Appendix
A.1 Standard Specications
Item CE LITE-50
CPU 32-bit
Operating Method Grit Rolling Method
Driving Method Stepping Motor
Maximum Cutting Area*
1
498 mm × 3 m
Precision Guaranteed Area (width × length)*
1
478 mm × 1 m
Compatible Media
Widths
Minimum 210 mm (A4, 8.27")
Maximum 508 mm (20")
Standardized*
2
JIS A2/A3/A4/B3/B4, ISO A2/A3/A4/B2/B3/B4
8.5"/11"/12"/15"/17"/20", 220 mm / 320 mm / 329 mm (equivalent to A3+) / 500 mm
Number of Push Rollers 2
Maximum Cutting Speed 500 mm/s (All direction), 18 levels
Maximum Acceleration 1.0 G (9.8 m/s2) (All direction) 2 levels
Maximum Cutting Force 2.1 N (210 gf) 26 levels
Mechanical Step Size 0.025 mm
Program Step Size GP-GL: 0.1 / 0.05 / 0.025 / 0.01 mm, HP-GL
TM
*
4
: 0.025 mm
Repetition Precision 0.1 mm or less/1 m*
1
Number of Attachable Tools 1
Type of Cutter Cemented Carbide Blade
Type of Compatible Pens Supported with the specically designed pen adapter*
3
Compatible Media for Cutting Marking lms (PVC/uorescence/reective) with a thickness of 0.1 mm or less,
excluding high luminance reective lms
Interface USB 2.0 (Full Speed)
Buffer Memory Size 2 MB
Types of Commands GP-GL / HP-GL*
4
(switched with operation panel or automatically switched
based on command)
LDC Display 4.3" color touch panel
Automatic Registration Mark Scanning*
5
Available (equipped with ARMS7.0), 4-point correction, segment area correction,
multiple registration mark correction, automatic registration mark detection, etc.
Key Features Simple Printing & Cutting (with Media Tilt Correction), Ofine Output, and
Barcode Management Functions
Power Supply Rating 100 - 240 VAC dedicated adapter output, 24 VDC (2A)
Power Consumption 32 W or less
Usage Environment 10 to 35°C, 35 to 75% R.H. (no condensation)
Precision Guaranteed Environment 16 to 32°C, 35 to 70% R.H. (no condensation)
Outer Dimensions (approximate) [W × D × H] 784 × 227 × 164 mm (not including the roll media stocker)
Mass (Weight) (approximate) 8 kg (not including the roll media stocker)
Compatible OS*
6
Windows 10 (Home/Pro/Enterprise/Education)
Windows 8.1 (Windows 8.1/Pro/Enterprise)
Windows 8 (Windows 8/Pro/Enterprise)
Windows 7 (Ultimate/Enterprise/Professional/Home Premium)
Mac OS X 10.6 - 10.13 (10.6 is compatible with only Graphtec Studio)
Standard Software Graphtec Pro Studio, Graphtec Studio for Mac, Cutting Master 4, Windows Driver
Warranty Period 1 year (warranty registration is required)
Related Standards Safety Standards UL/cUL/CE Markings
EMC Standards VCCI Class A / FCC Class A / CE marking (EN55032 etc.,)
*1: When using lms and setting conditions specied by our company.
*2: For non-standardized sizes, use the carrier sheet.
*3: The specically designed pen adapter (sold separately) is required. Three types of xing screws to support different
pen thicknesses are included.
Compatible pen diameters: 8.0 - 11.3 mm (there may be pens within this range that are not compatible)
*4: HP-GL
TM
is a registered trademark of the Hewlett-Packard Company in the United States.
*5: It may not be possible to scan registration marks depending on the color and texture of the media being used.
*6: Any OS for which support by the OS manufacturer has expired will not be applicable for support by our company either.