GRAPHTEC CELITE-50 - Setting the Tool Up Speed

5-8
Chapter 5 Detailed Settings
Setting the Tool Up Speed
Set the moving speed of the tool when it is raised during cutting.
The AUTO setting will apply the same speed as the cutting speed (when the tool is lowered).
Congurable values: AUTO, 10, 20, 30, 40, 50 (cm/s)
1. From the "MENU" screen, open the "TOOL
1/2" screen.
2. Touch the "TOOL UP SPEED".
3. Use the " " and " " to select the moving
speed and conrm the selection with the
(Conrm).