GRAPHTEC CELITE-50 - Default Chapter; Introduction; Notes on this Manual; Registered Trademarks

i
Introduction
Introduction
Thank you for purchasing Cutting Plotter CE LITE-50. This device is a cutting plotter that realizes high-speed
and high-precision work. In addition to cutting marking lms, this device can also be used as a pen plotter.
Please carefully read through this manual prior to use in order to ensure safe and proper use of the device.
This product is manufactured and sold under license from Gerber Scientic Products, Inc. for US Patent No.
5,537,135 and its foreign patents.
Notes on this Manual
(1) No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by
any means, without the prior written permission of Graphtec Corporation.
(2) The product specications and other information in this manual are subject to change without notice.
(3) While every effort has been made to provide complete and accurate information, please contact your sales
representative or nearest Graphtec vendor if you nd any unclear or erroneous information or wish to make
other comments or suggestions.
(4) Not with standing the stipulations in the preceding paragraph, Graphtec Corporation assumes no liability
for damages resulting from either the use of the information contained herein or the use of the product.
Registered Trademarks
All names of companies, brands, logotypes, and products appearing in this manual are the trademarks or
registered trademarks of their respective companies.
Copyright
This User's Manual is copyrighted by Graphtec Corporation.