Chapter 4 Convenient Functions
Convenient cutting functions that this device is equipped with are explained in this chapter.
4.1 Cutting Roll Media
4.2 Cutting using the Carrier Sheet
4.3 Plotting with the Drawing Pen
4.4 Cutting from a USB Memory
4.5 Cutting Multiple Media using the Same Data
(Copy Function)
4.6 Cutting upon Specifying the Cutting Position
4.7 Expanding the Cutting Area
4.8 Aborting and Pausing during a Cut
4.9 Withdrawing the Tool Carriage
To Next Page
Loading...
