4-11
Chapter 4 Convenient Functions
Loading the Carrier Sheet
•
Depending on the type of media, the center of the media may be lifted up because the push rollers cannot
hold down the media sufciently. In this case, move the Media holding rollers (movable) to the position where
the media is lifted up. When the media is load at, move them to the right push roller.
•
Move the Media holding rollers (movable) after raising the Media set levers.
Loading the Carrier Sheet Up Against the Push Rollers
1. Raise the media set levers and release the push rollers.
2. Set the push roller on the left side at the position of the " " mark.
Set the push roller on the right side according to the width of the carrier sheet.
3. Lower the media set levers on both sides to lock the push rollers.
4. Press "LOAD MEDIA" on the HOME screen, and select
"CARRIER SHEET".
5. Evenly position the leading edge of the carrier sheet up against the push rollers.
Pass the sheet carrier sheet under the push roller positioning guide and load it so that it is parallel with
the front guide.
Carrier Sheet
Push Roller
Push Roller Leading Edge of Carrier Sheet
Set to be parallel
Front Guide
Carrier Sheet
Leading Edge of Carrier Sheet Push Roller
To Next Page
Loading...
