GRAPHTEC CELITE-50 - 4.8 Aborting and Pausing during a Cut

4-24
Chapter 4 Convenient Functions
4.8 Aborting and Pausing during a Cut
The cutting operation of a cut or test, etc. can be aborted or paused.
1. To stop a cut while it is in progress, touch the (Stop).
2. As the operation method accompanying conrmation of whether
to exit the operation will appear, make a selection according to
the situation.
"CHANGE SETTING" button:
Used to change the setting for the CONDITION NO. (cutting
condition).
(Conrm) button: Aborts the cutting process.
(Exit) button: Resumes the cutting process.