4-3
Chapter 4 Convenient Functions
Slide the rollers toward forward when using a 2 inch media core or toward backward when using a 3 inch media
core. Loosen the knob to move the roller and fasten the knob to x the roller in place. Place the roll media on
top of the rollers so that the media can be pulled out from the top.
Roll Media
Roller
Roller
Knob
Roller
Roller
Knob
When using the roll media stocker, pay attention to the installation space so that the cutting operation is not
affected (refer to "1.4 Installing the Main Unit").
To Next Page
Loading...
