H3C S5100-SI

2-4
To do… Use the command… Remarks
Specify the
port-based
mode
qos-profile port-based
Configure
the dynamic
QoS profile
application
mode
Specify the
user-based
mode
undo qos-profile
port-based
Optional
User-based by default
z If the 802.1x
authentication mode is
MAC-based, the
dynamic QoS profile
application mode must
be configured as
user-based.
z If the 802.1x
authentication mode is
port-based, the
dynamic QoS profile
application mode must
be configured as
port-based.
Follow these steps to apply a QoS profile manually:
To do… Use the command… Remarks
Enter system view
system-view —
In system view
apply qos-profile
profile-name interface
interface-list
Enter
Ethernet
port view
interface interface-type
interface-number
Apply a
QoS
profile to
the
specific
ports
In
Ethernet
port view
Apply a
QoS profile
to the port
apply qos-profile
profile-name
Use either
approach
By default, no QoS
profile is applied to
a port.
Displaying and Maintaining QoS Profile Configuration
To do… Use the command… Remarks
Display QoS profile
configuration
display qos-profile { all | name
profile-name | interface
interface-type interface-number |
user user-name }
Available in any view